A 10-Point Plan for Resources (Without Being Overwhelmed)

Benefits of Epoxy Flooring

In interior design, flooring is a very important aspect especially in a factory. Wear and tear of a factory’s flooring is the reason why. The choice of flooring is very important as it is usually a major investment since it covers a wide region. The most common flooring adopted by many is the epoxy flooring. Its durability, minimum maintenance and environmental friendliness are the reasons why they are preferred. For residential and commercial purposes, the epoxy flooring is widely used. Epoxy floor coatings are usually applied over concrete walls as they have great binding capabilities and their surfaces are appealing to the eye.

A type of plastic that is catalyzed is known as epoxy. A resin is what it is generally referred to. It consists of the Bis phenol- A and polyamine compounds. Dr. Pierre Castam, a Swiss scientist developed the Epoxy resin in the 1930’s. The contact between the resin and the hardener causes a catalytic reaction. The creation of a strong chemical crosslink happens when the two bind together. Epoxies can be recoated in a short time period because of this binding technology. There are three main varieties of epoxy flooring. 100% solid epoxy, solvent based and water based epoxies are the three epoxy flooring types. 100% solid epoxy is the best when compared to the three. Thick coating is not the best with water and solvent based epoxies even though they are user friendly. The requirements needed in the designing of industrial floors are all met by the use of solid epoxies.

The qualities of epoxy floorings are strength, excellent chemical resistance and toughness. In addition, they are abrasion resistant, waterproof, heat resistant and resistant to chemical corrosives. They are toxic free when dry therefore they can be used in the flooring of residential places and children play areas. The practical application of flooring follows certain steps. The compounds are mixed in proper ratios then applied on the floor to a minimum depth of 2mm. Seven coats are needed in epoxy flooring to achieve a finished surface that is glossy. The base coat, one or two epoxy coats, broadcast coats of sand that is colored or flakes and a top coat are the types of coats.
Discovering The Truth About Sales

The ease of maintenance is the main advantage of epoxy flooring. The best solution in the protection of concrete walls is the epoxy flooring that is abrasion resistant, chemical resistant and protects against thermal shock. These are the experiences the floor may undergo in an industrial set up. Epoxy flooring solutions are seen to increase with technology.Doing Resources The Right Way